For use on specific Harley-Davidson® Sportster and Buell® model yearsOptional sleeves for JIMS® Sprocket Shaft Bearing Installation ToolBoth optional sleeves are required to install the sprocket bearing
BrandModelYearSales nameCountry version
Harley DavidsonXL 1200 C2003Sportster CustomALL
Harl..
Designed to take the hassle of removing shock springsFits most springs on twin-shock motorcycles
BrandModelYearSales nameCountry version
HONDACB 1000 F1996ALL
HONDACB 1000 F1995ALL
HONDACB 1000 F1994ALL
HONDACB 1000 F1993ALL
HONDACB 1000 R2016ALL
HONDACB 1000 R2015ALL
HONDACB 1000 R2014ALL
HOND..
Slides over the shaft, allowing you to loosen the bolt to remove the jackshaft assembly when switching out starters or removing the inner primaryHolds the jackshaft by the splines without damaging themDouble-sided
BrandModelYearSales nameCountry version
Harley DavidsonFLD 16902013Dyna Switchbac..
Fits tapered steering bearings 41-42 mm, 47-48 mm, 51-52 mm and 55-56 mmWorks on all frames with head tube between 100 mm to 240 mm in lengthQuick adjustment slotted puller rod for quick installationSafely installs the tapered bearing race in the frameInnovative double sided drivers..
Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punchPuller design ensures bearing is pulled perfectly straight to eliminate possible damage to frameWorks on all tapered bearing races from 47 mm to 55 mm O.D.Hardened steel jaws engag..
Versatile swivel extension can be turned with a Phillips screwdriver, 1/4" ratchet or driver, or 14 mm wrench or socketIdeal for use with spark plug sockets to access hard to reach spark plugsSwivel feature allows extension to be used at up to 15° anglePerfect for tool pack and toolbox alike..
Use wrench on external hex of tool for situations exceeding 90 lb/ft (EU: 122,02 Nm)Fits internal hex on many late model sportbike axles and some dirt bikes3/8" square drive on both ends rated to 90 lb/ft (EU: 122,02 Nm)For touring and trailside use onlyMade in the U.S.A.Weighs only 2.5 oz
BrandM..
3/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM)Allows T-6 Combo Lever™ to be used as a 3/8" (EU: 0,95 cm) driverCoin knurled to facilitate turning s..