MOTION PRO
Brand: MOTION PRO
Use wrench on external hex of tool for situations exceeding 90 lb/ft (EU: 122,02 Nm)Fits internal hex on many late model sportbike axles and some dirt bikes3/8" square drive on both ends rated to 90 lb/ft (EU: 122,02 Nm)For touring and trailside use onlyMade in the U.S.A.Weighs only 2.5 oz
BrandM..
40,05€
Ex Tax:33,65€
Brand: MOTION PRO
BrandModelYearSales nameCountry version
SUZUKIVS 700 GLE1987IntruderEUROPE
SUZUKIVS 700 GLE1986IntruderEUROPE
SUZUKIVS 700 GLF1987IntruderEUROPE
SUZUKIVS 700 GLF1986IntruderEUROPE
SUZUKIVS 700 GLP1987IntruderEUROPE
SUZUKIVS 700 GLP1986IntruderEUROPE
SUZUKIVS 750 GLF1989IntruderEUROPE
SUZUKIVS 750 ..
63,75€
Ex Tax:53,57€
Brand: MOTION PRO
BrandModelYearSales nameCountry version
SUZUKIGSX-R 11001998EUROPE
SUZUKIGSX-R 11001998AMERICA
SUZUKIGSX-R 11001997AMERICA
SUZUKIGSX-R 11001997EUROPE
SUZUKIGSX-R 11001996EUROPE
SUZUKIGSX-R 11001996AMERICA
SUZUKIGSX-R 11001995EUROPE
SUZUKIGSX-R 11001995AMERICA
SUZUKIGSX-R 11001994AMERICA
SUZUKIGSX-..
37,09€
Ex Tax:31,17€
Brand: MOTION PRO
BrandModelYearSales nameCountry version
SUZUKIRV 1251977ALL
SUZUKIRV 1251976ALL
SUZUKIRV 1251975ALL
SUZUKIRV 1251974ALL
SUZUKIRV 1251973ALL
SUZUKITC 1251975ProspectorAMERICA
SUZUKITC 1251974ProspectorAMERICA
SUZUKITC 1251973ProspectorAMERICA
SUZUKITS 1251981ALL
SUZUKITS 1251980ALL..
25,80€
Ex Tax:21,68€
Brand: MOTION PRO
BrandModelYearSales nameCountry version
SUZUKIGSX 600 F2006KatanaAMERICA
SUZUKIGSX 600 F2005KatanaAMERICA
SUZUKIGSX 600 F2004KatanaAMERICA
SUZUKIGSX 600 F2003KatanaAMERICA
SUZUKIGSX 600 F2002KatanaAMERICA
SUZUKIGSX 600 F2001EUROPE
SUZUKIGSX 600 F2001KatanaAMERICA
SUZUKIGSX 600 F2000KatanaAMERICA
S..
24,16€
Ex Tax:20,30€
Brand: MOTION PRO
Designed for installation of the swingarm bearings on late-model Japanese off-road motorcyclesKit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mmIncludes three drivers for use with common bearing sizesPuller draws bearing into the swingarm200 mm long..
55,44€
Ex Tax:46,59€
Brand: MOTION PRO
Allow you to relocate the switch on 4x4 models when installing a twist throttle kitUse with Motion Pro twist throttle kitsInclude mounting rings, mounting screws and setscrewsMade in the U.S.A.
BrandModelYearSales nameCountry version
POLARISMAGNUM 325 4X42002AMERICA
POLARISMAGNUM 325 4X42001AME..
49,31€
Ex Tax:41,44€
Brand: MOTION PRO
Precise four-channel vacuum indicator designed specifically for intake synchronization of engines with multiple carburetors or throttle bodiesIncludes manometer fluid, hoses, 5 mm adapters, in-line restrictors and instructionsSpill-proof design means the tool can be stored in a horizontal or vertica..
181,46€
Ex Tax:152,49€
Brand: MOTION PRO
Does NOT work with older Motion Pro mercury carburetor synchronizersProprietary petroleum-based mineral oil blendBottle contains approximately 6 ml of fluidMercury free..
12,82€
Ex Tax:10,77€
Brand: MOTION PRO
3/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM)Allows T-6 Combo Lever™ to be used as a 3/8" (EU: 0,95 cm) driverCoin knurled to facilitate turning s..
47,89€
Ex Tax:40,25€
Brand: MOTION PRO
3/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM)Allows T-6 Combo Lever™ to be used as a 3/8" (EU: 0,95 cm) driverCoin knurled to facilitate turning s..
49,95€
Ex Tax:41,97€
Brand: MOTION PRO
3/8" (EU: 0,95 cm) drive male and 1/4" (EU: 0,64 cm) drive female for use with sockets for smaller front axles3/8" (EU: 0,95 cm) square drive is rated for a maximum torque of 90 lb/ft (EU: 122,02 NM)Allows T-6 Combo Lever™ to be used as a 3/8" (EU: 0,95 cm) driverCoin knurled to facilitate turning s..
46,08€
Ex Tax:38,72€