Install easily between the seal head and the compression base plate on the shock shaftLowers the bike 1" to 4"Kit includes spacers in thicknesses from 2mm to 15mmNot for shocks with top-out spring...
Install easily between the seal head and the compression base plate on the shock shaftLowers the bike 1" to 4"Kit includes spacers in thicknesses from 2mm to 15mmNot for shocks with top-out spring...
This tool is quick and easy to use and a "must have" for work on a higher volume of WP shocksLess expensive and easier to use than the factory recharging toolWorks on all WP shocks that have a reservoirClamps on to the reservoirFor KTM WP Shocks
BrandModelYearSales nameCountry version
GAS GASEC..
Fits in the circlip groove to allow the piston to slide past the groove without damageAllows the removal of shock piston without damaging piston bandDesigned for Suzuki with Showa shocks
BrandModelYearSales nameCountry version
SUZUKIRM-Z 2502012ALL
SUZUKIRM-Z 2502011ALL
SUZUKIRM-Z 2502010ALL
SU..
Replace the stock shaft nut with an asymmetric valve to offer different flow rates for compression and reboundThe stock low speed rebound adjuster flows at the same rate during compression and rebound which makes the lowest speed damping too mushy, causing bottoming and an unresponsive feeling durin..